Skip to content

news

Why is your ice maker running slow? vivohome helps!

by Frank Law 09 Jan 2024 0 Comments

Why is your ice maker making ice slow?


    As the weather is getting warmer, it is the perfect time for ice makers getting back to your kitchen. However, like all other electrical machines, sometimes your ice maker may make ice very slow or even not work properly. To allow your ice machine serving as a better helper for you, here are some tips.

 

ice maker

    First, you need to understand how does an ice maker work. Long before automatic ice machine was invented, people used to pour water into a mold and place it in the fridge. The modern machine has simply automated this process. At the beginning of the ice making cycle, an electrical signal is sent to the water valve to fill the mold. Then the freezer goes to work. The process will be halted soon as the cubes reach 5 - 9 degrees Fahrenheit.

 

    The ice cubes will then be pushed out of the molds into the collection tray through the ejector blades. A shaft separates the tray from the dispenser at the front of the unit. This cycle will continue until the ice cubes are stacked to its capacity. Above states the rough working process of your ice maker machine.

 

ice maker

   

    Here are several common reasons why sometimes your ice maker isn’t working as expected.

 

  1. Power supply.

    If the unit won’t turn on, make sure if it is plugged into an outlet of the proper voltage and the circuit breaker is functioning. If the problem persists, the unit will need to be repaired by a qualified electrician.

 

  1. Clogged or leaking water

    If the water line to your ice maker is clogged, it is impossible to make quality ice. The scenario is likely to be there is no water reaching the freeze tray when the pump is operating or water leaking from the unit.

 
  1. Blocked mold

    Misshapen ice, fractured ice and frosted ice could all possibly be stuck in the ice mold. When an entire batch of ice gets stuck, no new ice can be formed. The easy fix is to turn off your ice maker (flip the filler bar up) and use a pitcher to gently cover the ice maker tray with warm water. The stuck ice bits would be melt away without adding any chemicals to your ice tray – making it safe to start making ice again right away.

 

    *Be sure to clean out the ice bin so that no liquid water or fractured ice remains when your tray is clear.

 

  1. Unsuitable operating environment

 

    If ice produced is too small or soft, it may be the over-warmed ambient air temperature, lower water supply or the water placed in the reservoir is too warm. Try use chilled water. A faulty ice maker thermostat can also interfere with the normal formation of ice cubes.

 

ice maker

 

    It is super easy to become reliant on the convenient ice and deliciously cold water. Like any other household appliances, ice maker machines require your careful and regular maintenance. Instead of waiting for days to calling in an expensive technician, you are certainly capable of handling some easy-to-fix problems on your own!

Prev Post
Next Post

Leave a comment

Please note, comments need to be approved before they are published.

Thanks for subscribing!

This email has been registered!

Shop the look

Choose Options

VIVOHOME
Register To Get 12% Off

Recently Viewed

Edit Option
Back In Stock Notification
this is just a warning
Login
Shopping Cart
0 items